Lexia-3 PP2000 lexia3 Peugeot 307 works with most of Citroen and Peugeot cars from 1995 to 2014.
1 Support read identification, read fault codes, clear fault codes,auto-scan etc.
2 Multiple language available.
3 New version support Peugeot 307.
PP2000/LEXIA-3 Interface works for both Citroen and Peugeot
Buy it for 8 reasons:
1 Support Peugeot 307
3 Update :CD
4 Diagbox :7.76
Firmware will update with software update.
5 Lexia-3 PCB edge is golden with original full chips.Double PCB has 7pcs optocouplers, which are 100% original and new.
6 Lexia-3 relays are 12pcs, which are 4.5V, it is more stable.
7 PP2000 have 2pcs Optocouplers.
8 Best quality 921815C chip ,same as original chip.
1 LEXIA-3 PP2000 Hardware and software requirements
Computer system:XP system
Software requires at least Intel Celeron/Pentium III 400 MHz,128 MB RAM,50MB free HDD space and USB 1.1 port (USB 2.0 recommended) and Microsoft Windows 98 SR2/2000/XP with the latest service pack installed.
2 Computer cannot install anti-virus software.
3 PP2000 cannot install with DIAGBOX in same computer.
LEXIA-3 PP2000 Peugeot 307 Description:
-Diagbox Software free provide
1.It is compatible with Citroen cars including:C1,C2,C3,C4,C6,C8,C-CROSSER,NEMO,BERLINGO,JUMPY,JUMPER,AX,SAXO,BX and so on. But please pay attention, according to our customer's experience.
2.It is compatible with most Peugeot cars from 1995 to 2012.If you have the two types of cars,please pay attention,please check with us first before purchase.
3.Diagnostics is performed via OBD-II connector (which is located near steering wheel) or via manufacturer-specific connector (only older cars,pre-2001).
Unlike other universal car scanner tools which only read fault codes;this software performs nearly ALL the functions like the original dealer diagnostic tool.Our diagnostic interface contains K-Line multiplexor,CAN-BUS interfaces and SAE J1850 bus (both PWM and VPW).
Displays complete identification of control unit, e.g. part number,software/hardware version, manufacturer, etc...
2. Read fault codes
Displays all stored and pending fault codes with complete description (e.g. "Rail pressure - too low pressure").
Program supports report printing or copy to clipboard.
3. Clear fault codes
this function clears all stored fault codes and other diagnostic information.
4. Auto-scan (complete car scan/test)
Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes.
5. Measured Values
Program displays live Data like Engine Speed,Battery voltage,Oxygen Sensor,Coolant Temperature, etc.Values can be displayed in graph, 9 values at once, or full listing (all measured values).Logging to file is also supported,which allows offline analysis.
6. Actuator test
Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..)
LEXIA-3/PP2000 Package list:
1pc x Main unit with extension OBD2 cable
1pc x Long 9pin to USB cable
1pc x Short 9pin to USB cable
1pc x OBD2 cable
1pc x DVD
Q:Can your lexia-3 new do Citroen Picasso 2004 and Peugeot partner 2?
Q:Can this tool do Peugeot 307?
A:yes,it can do.
Any questions, please don't hesitate to contact us.
Q:Does the Lexia-3 software is French?
A:The lexia-3 has multi-language.It has French language,when you install the software,you can choose the language you need.
Q:Can I install it under Windows 7?Does it work for vecicle type Citroen C4 Picasso year 2008 ?
A: No,it must under Windows XP and close the virus software.It can work for Citroen C4 Picasso year 2008.But some function depends on the car model.
Q: Does Lexia-3 work with Peugeot 308?
A: Yes, it does, but which year of your Peugeot 308? Lexia-3 PP2000 works with Peugeot 308 from 1996 to 2008.
Q: I have installed it on windows 7 system, but it cannot work, what is the problem?
A: It can only be installed on XP system; you need to change another computer with XP system.
Q: It can be updated?
A: It is updated by CD.
Q: Is PPS compatible with Peugeot 307 HDI?
A: PPS2000 work with Peugeot 307, but it is not compatible with Hybrid Diesel Peugeot only with the gasoline car.
Q: Can Lexia-3 PP2000 (item NO. SP08-C) work with Peugeot 407 2005, after install the NEW DPF, can I reset DPF counter? After Eolys is full, can I reset Eolys counter?
A: PP2000 supports Peugeot 407 2005, but the DPF and Eolys are truck or diesel car systems, we haven’t tested it.
Q: Would you please store the software lexia3 pp2000 and diagbox6.01 in one CD?
A: No, they are not allowed to store in one CD, they have to be stored them in two different CD, otherwise the software installation will get errors.
Q: I install diagbox software on Windows XP3, 32BIT, but it can’t communicate with the car, besides, I install PPS software in another computer (Win XP, 32bit, SP3), I successfully active it, but can’t communicate with the car either, what’s the problem?
A: Try to install Lexia3 software, if lexia3 software can communicate with the car. So it suggests you didn’t install diagbox software properly, or your computer system is not compatible with diagbox software, we will produce video tutorial on how to install Diagbox, please check it in the column “video”.
Q: It can do C5 cars?
A: It is not stable for c5 cars, you'd better not choose this for c5.
kit works great...however many people who buy the product may find they can not use it properly,and that a manual is impossible to find !!
But wait.....when programme is installed,go to reports on main page...or click the downwards facing small arrow on the top left...and a pdf of the user manual drops down...so dont panic...there is a rough guide built in.
After sale service:
Almost all item has one year warranty.
We also offer free fix to almost item we sold within one year,free repair.Man-made damage need pay.
We not offer warranty on keys,cables,adapter,online sent software,please notice it.